+91 22 - 6144 8000 - 99

Globe valves

Oswal globe valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem and hand wheel. Valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90° changes of direction resulting in pressure drop and turbulence. The most advance design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Globe valves are generally considered where moderate control or regulation of flow is required.

Globe valves are adequate for all service media. Valves are marked with flow direction since they are recommended to install with flow and pressure under the disc. It can also be installed in reverse condition depending upon the conditions. The globe Valves is generally faster to operate due to less travel. But requires much force to operate compared to Gate valves.

Product Range For Cast And Forged Globe Valves

Valve Type Class Rating Size Range Shell Material As Per Specification
Globe 150# 2" to 24"

ASTM A216 Gr. WCB
ASTM A217 Gr. WC1
ASTM A217 Gr. WC6
ASTM A217 Gr. WC9
ASTM A217 Gr. C5
ASTM A217 Gr. C12
ASTM A351 Gr. F8
ASTM A351 Gr. F3
ASTM A351 Gr. F8M
ASTM A351 Gr. CF3M
ASTM A351 Gr. CN7M
ASTM A351 Gr. CF8C
ASTM A351 Gr. CD4Mcu
ASTM A351 Gr. CK3MCuN
ASTM A352 Gr. LCA
ASTM A352 Gr. LCB
ASTM A352 Gr. LCC
ASTM A494 Gr. CW6MC
ASTM A494 Gr. CW2M
ASTM A494 Gr. CW2M
ASTM A494 Gr. CY40
ASTM A494 Gr. CU5MCuC
ASTM A995 Gr. 1A
ASTM A995 Gr. 4A
ASTM A995 Gr. 5A
ASTM A995 Gr. 6A
NACE malt. Grade to NACE MR0175/NACE MR

Globe 300# 2" to 24"
Globe 600# 2" to 12"
Globe 800# 1/2" to 2"
Globe - Pressure Seal 900# 1/2" to 12"
Globe - Pressure Seal 1500# 1/2" to 12"
Globe - Pressure Seal 2500# 2" to 4"
Globe - Cryogenic 150# 2" to 16"
Globe - Cryogenic 300# 2" to 16"
Globe - Cryogenic 600# 2" to 16"

Note:
  • Valves can be supplied with actuator,pad lock and other accessories like limit switch,position indicator,solenoid valve as per requirement
  • Stem extention,underground service features are available

Standards

Design Standard BS 1873
Testing Standard BS EN 12266 – 1
Face To Face ASME B 16.10
End Connection Flanged End - ASME B 16.5
Butt Weld End – ASME B 16.25
Pressure – Temperature Chart ASME B 16.34

Valve Operation

Handwheel
2” – 10” - Class 150, 300
2” – 6 ” - Class 600
2” – 4 ” - Class 900, 1500
Gear Operator
12” & Above - Class 150 & 300
8” & Above - Class 600
12” & Above - Class 900 & 1500

Material

STRUCTURE End Connection Flanged End Raised Face, Butt Weld End, RTJ,. ETC
Operation Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
MATERIAL Shell WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu,
Hastelloy, Inconel, Duplex Stainless Steel
Trim 13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel